High Quality 1100/H112 Parallel Flow Microchanel Flat Aluminum Tube

• Customization: Available
• Application: Air Condition, Automobile, Water Heater
• Shape: Oval
• Model NO.: 16X2.0X0.32
• Surface Treatment: Mill Finished
• Grade: 3000 Series
• Alloy: Alloy
• Temper: O - H112
• Transport Package: Export Standard Packing
• Specification: 16mm x 2.0mm
• Trademark: Tongxin
• Origin: Shandong, China
• HS Code: 7608
• Production Capacity: 500 Tons Per Month

Product Description

High Quality 1100/H112 Parallel Flow Microchanel Flat Aluminum Tube

Commonly used material chemical composition

No.	Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	V	Ti
1	1050	≤0.25	≤0.40	≤0.05	≤0.05	≤0.05	---	≤0.05	≤0.05	≤0.03
2	1100	≤0.95(Si+Fe)		0.05-0.20	≤0.05	---	---	≤0.10	---	---
3	3102	≤0.40	≤0.70	≤0.10	0.05-0.40	---	---	≤0.30	---	≤0.10
4	3003	≤0.15	≤0.15	≤0.01	0.90-1.10	≤0.03	≤0.03	≤0.05	≤0.05	≤0.05

Supply state and mechanical properties

Alloy	Temper	Tensile Strength	Yield Strength	Elongation
1050	O/F/H111/H112	≥65MPa	≥20MPa	≥25%
1100	O/F/H111/H112	≥75MPa	≥20MPa	≥25%
3102	O/F/H111/H112	≥75MPa	≥20MPa	≥25%
3003	O/F/H111/H112	≥75MPa	≥20MPa	≥25%

The corrosion resistance performance
Salt spray test ≥750hours
The pressure resistance performance

Automobile Condensers	Household Condensers	Evaporators
≥9MPa	≥13.5 MPa	≥3.5 MPa

Multiport Extruded Aluminum Tube(MPE)- which is used for automobile air conditioner condenser has larger internal section area, better effectiveness for heat transfer. At the same time, has the following characteristics:
1. Low weight
2. Good thermal and electricity conductivity
3. Excellent corrosion resistance
4. High cycle reuse value
5. High surface quality
6. Narrow tolerance range
Beside increased global performances, an all-aluminium brazed heat exchanger using MPE will also present better corrosion resistance. MPEs are primarily used for the following applications:
Condensers
Evaporators
Oil coolers
Radiators
Heater cores  
Package: In coil or Straight with fixed length.
Surface Treatment : With Zinc spraying or without Zinc spraying.










 

Q: How long is your delivery time?

A: Generally it is 5-7 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us.